Skip to main content

Processing Steps of Flaxseed Oil Extraction Line

The flaxseed oil production process holds the most effective ingredients in flaxseed, such as polyunsaturated fatty acids, proteins, dietary fiber, vitamins, trace elements and so on. Pressed oil is more suitable for a special supplement for human health. The normal temperature pressure method refers to the extraction of flaxseed oil at room temperature under great pressure from physical machinery without the traditional process of high-temperature frying or steaming, so normal temperature pressed oil still distributes to underdeveloped protein cells and is enriched in There are elements.

The steps of flaxseed oil extraction line are mainly: 

Flaxseed selecting → screening → cleaning up impurities → crushing → conditioning → pressing → filtration → filtered linseed oil

Cleaning

Cleaning Section in the production plant helps to reduce the wear of the equipment, to increase the oil yield, to avoid the deepening of the colour of the crude flaxseed oil, to avoid the increase of sediment content and the smelting consumption. Equipped with high efficient cleaning screen with the functions of wind collection, screening and stone removal and magnetic separator for removing impurities such as dust, shell, stem and leaf, mud block, sand, stone, metal and so on.

Crushing

After cleaning, the purified material is still a whole seed and its shell is hard, which is not good for squeezing the oil and should break

Conditioning

The purpose of conditioning is to adjust the moisture of the flaxseed. According to the characteristics of linseed, the appropriate moisture content is about 7% ~ 8%. Too high and too low moisture content is not conducive to the extraction of oil, and the conditioning process is usually performed in a conditioning pot.

Pressing

In the pressing process, GOYUM-1500 screw oil press is specially selected, this machine is specially designed for a large operation, so the oil can be pressed and expanded many times in the press chamber to realize the strong pressing, and the oil yield is high in one press.

Filtration


The crude oil extracted from the oil extraction machine contains oil residue, which must be separated before refining. The crude oil is first passed through the oil scraper into the oil tank to separate the initial oil residue. The separated oil is then pumped into a frame-type filter to filter, and then the filtered oil will be sent to the purification workshop for refining.

The crude oil extracted from the oil extraction machine contains oil residue, which should be separated before refining. The crude oil is firstly passed through the oil scraper into the oil tank for preliminary oil residue separation. The separated oil is then pumped into the frame-type filter for filtering, and then the filtered oil would be sent to the refining workshop for refining. 

Advantages of Our Flax Seed Oil Production Line


First, our oil pressing line has a flexible production capacity, it can be equipped with complete industry-standard equipment or can also be customised according to the actual needs of different customers. The equipment has a large processing capacity and low failure rate, which ensures higher working efficiency. The normal continuous working hours of the equipment are fully guaranteed and the service life is long, which can create greater economic benefits and production capacity for the users.

Second, the material of our low-temperature oil pressing line must be carefully selected, and the whole temperature during the oil extraction procedure is relatively low. Therefore, the colour of the extracted crude oil is lighter and the acid value is lower.

Comments

Post a Comment

Popular posts from this blog

How Is Oil Extracted From Sunflower Seeds?

Introduction of Sunflower Oil Low saturated fats and high Vitamin E content make Sunflower seeds oil one of the best vegetable oil alternatives for healthy eating. Oil should be removed to separate it from solids by using one of the many processes. For cooking applications, three types of sunflower oil are produced, which are different in oleic levels, such as: Nusun, linoleic and high oleic. Oil-seed-type sunflower seeds are used for oil production, rather than the seeds of common snack seeds. Sunflower Oil Extraction There are two method to extract oil from sunflower seed that is Hot pressed and cold pressed with slightly different flavors in the finished product. In a cold press, the hull is removed; The seeds are broken into small pieces and send to oil extraction machine which extract oil from the seeds, and the oilckae throughout the cone. As a result oil is usually labeled as "extra-virgin" sunflower oil, but this process leaves much oil in the oilseed. Hot p...
Post a Comment
Read more

What Are the Best Cooking Oils to Use?

You may be surprised to know that calories are pretty much the same in oils because oils are 100 percent fat. I am sure you have heard once or twice in you life time that fat is bad for you and potentially causes heart disease. Although oil is bad for you, your body needs a particular acid called linoleic (an unsaturated Omega 6 fatty acid) to stay healthy. As a result, you need to eat the equivalent of a tablespoon of oil or two a day. So what are the best cooking oils to use if you have to use them for cooking? Before we settle on the best cooking oils let's review the fat in oils because fats come in categories - they can be good, bad, or neutral for health. The word "fat" has two meanings in foods. It is a generic term for any food fat better known as "lipids". These fats mostly come from meat and dairy animals and are solid at room temperature. In contrast, oils, which are also fats, are mostly liquid at room temperature and come from plants. All food fa...
Post a Comment
Read more

How to Start Soya bean Oil Extraction Plant

Have you ever thinking about choosing the best oil press on a small or large scale? GOYUM provide a wide range of oil press machines for extract oil. Also, we will help you to choose oil mill machinery according to your requirement, offer a complete automated oil extraction plant for soya oil production. This is an automated small oil extraction unit of a fully adopted mechanically operated machine used in soybean processing in product oil for various purposes. It is a connection of small oil processing equipment incorporated for the purpose of continuous extraction of oil. This undoubtedly ensures high rates of oil that can counteract these enormous benefits combined with the easy and automated operation? Operating Area for Small Scale Fully Automated Plant The small unit has many areas of aeration as it is not specifically limited to soy processing. It has been widely used in domestic works to make vegetable oil, animal oil and other extraction based activities, which can m...
Post a Comment
Read more